创造vlan10并将G/0/1加入vlan10的命令是( )
A. system-view[H3C]vlan 10[H3C-vlan10]int GigabitEthernet 1/0/1[H3C-vlan10]
B. system-view[H3C]vlan 10[H3C-vlan10]port GigabitEthernet 1/0/1[H3C-vlan10]
C. system-view[H3C-vlan10]port GigabitEthernet 1/0/1[H3C]vlan 10[H3C-vlan10]
D. vlan 10port GigabitEthernet 1/0/1
查看答案
在默认状态下,H3C设备的Trunk模式只允许( )通过
A. vlan 0
B. Vlan 10
C. Vlan 1
D. Vlan 11
将交换机的g1/0/23设置为Trunk模式的命令是( )
A. [H3C]int g1/0/23[H3C-GigabitEthernet1/0/23] port link-mode route[H3C-GigabitEthernet1/0/23]
B. [H3C]int g1/0/23[H3C-GigabitEthernet1/0/23] port link-type trunk[H3C-GigabitEthernet1/0/23]
C. [H3C]int g1/0/23[H3C-GigabitEthernet1/0/23] port trunk permit vlan all[H3C-GigabitEthernet1/0/23]
D. [H3C]int g1/0/23[H3C-GigabitEthernet1/0/23] port link-type route[H3C-GigabitEthernet1/0/23]
查看聚合端口的命令( )
A. dis ip int b
B. dis vlan all
C. dis link-aggregation summary
D. dis ip routing-table
交换机端口聚合的作用是增加带宽,提高链路的可靠性。
A. 正确
B. 错误
微信支付 
支付宝支付