题目内容

In the inlet throttling speed regulating circuit, when the load is constant and the opening of throttle valve decreases, the pressure difference of the throttle valve would ().

A. Increase
B. decrease
C. unchange

查看答案

搜索结果不匹配？点我反馈

更多问题

A milling machine should work in the situation of large range of cutting force. When selecting the speed control circuit of the milling machine, what type of speed control circuit should be chosen? ()

A. inlet throttle speed control circuit with throttle valve
B. outlet throttle speed control circuit with throttle valve
C. inlet throttle speed control circuit with speed regulating valve
D. outlet throttle speed control circuit with speed regulating valve

查看答案

In a hydraulic circuit, the operating sequence needs to be changed frequently, what type of circuit should be adopted? ()

A. Sequential action circuit controlled by stroke switch
B. Sequential action circuit controlled by stroke valve
C. Sequential action circuit controlled by pressure relay
D. Sequential action circuit controlled by sequence valve

查看答案

In order to make the working mechanism can stay at any position reliably, for instance payload of a hydraulic crane, and the working mechanism will not slip under the condition of force, what circuitis usually used? ()

A. unloading loop
B. pressure regulation circuit;
C. pressure counter-balance circuit;
D. back pressure circuit.

查看答案

The speed regulating valve (installed between the hydraulic pump and the actuator) regulates ____ to control the speed of the actuator. ()

A. hydraulic pump flow
B. oil discharged from actuator
C. actuator supply pressure
D. the area of its opening

查看答案

In the inlet throttling speed regulating circuit, when the load is constant and the opening of throttle valve decreases, the pressure difference of the throttle valve would ().

A. Increase B. decrease C. unchange

A milling machine should work in the situation of large range of cutting force. When selecting the speed control circuit of the milling machine, what type of speed control circuit should be chosen? ()

In a hydraulic circuit, the operating sequence needs to be changed frequently, what type of circuit should be adopted? ()

In order to make the working mechanism can stay at any position reliably, for instance payload of a hydraulic crane, and the working mechanism will not slip under the condition of force, what circuitis usually used? ()

The speed regulating valve (installed between the hydraulic pump and the actuator) regulates ____ to control the speed of the actuator. ()

A. Increase
B. decrease
C. unchange