The point of intersection between the characteristic curve of the diode and the resistors loadline is known as the _____（）
A. point of operation
B. Q-point
C. quiescent point
D. All of the above
查看答案
If one silicon diode and one germanium diode are connected in series, the voltage drop across the combination of the two diodes will be equal to ______（）
A. the forward drop equal to that of the silicon diode
B. the forward drop equal to that of the germanium diode
C. the forward drop equal to that of the sum of the voltage drops across the two diodes
D. the forward drop equal to that of the difference of the voltage drops across the two diodes
The condition where increase in bias current will not cause further increases in collector current is called ___（）
A. cutoff
B. saturation
C. active operation
D. All of the above
The electrode with p-type material of a diode is called the ____（）
A. anode
B. cathode
C. depletion region
D. Zener region
Some of the modern ohmmeters have a diode test setting. If you do not have one of these ohmmeters then to test the diode you need to check its resistance in the forward and the reverse direction. Thes
A. relatively high in the forward direction and relatively low in the reverse direction
B. relatively low in the forward direction and relatively low in the reverse direction
C. relatively low in the forward direction and relatively high in the reverse direction
D. relatively high in the forward direction and relatively high in the reverse direction
微信支付 
支付宝支付