“When the CPU issues a command to the I/O module, it must wait until the I/O operation is complete”. It is programmed I/O , the word “wait” means ___________________.
A. the CPU stops and does nothing
B. the CPU does something else
C. the CPU periodically reads and checks the status of I/O module
D. the CPU wait the Interrupt Request Signal
查看答案
To save PSW, PC and remainder onto stack, why the operations of restoring them is reversed? Because the operations of stack are __________.
A. first in first out
B. random
C. last in first out
D. sequenced
Using stack to save PC and remainder, the reason is ________.
A. some information needed for resuming the current program at the point of interrupt
B. when interrupt occurs, the instruction is not executed over, so the instruction at the point of interrupt must be executed once again
C. the stack must get some information for LIFO
D. the start address of ISR must transfer by stack
The signals of interrupt request and acknowledgement exchange between CPU and requesting I/O module. The reason of CPU's acknowledgement is ________________
A. to let the I/O module remove request signal
B. to let CPU get the vector from data bus
C. both A and B
D. other aims
In DMA , the DMA module takes over the operations of data transferring from CPU, it means _____________.
A.the DMA module can fetch and execute instructions like CPU does
B. the DMA module can control the bus to transfer data to or from memory using stealing cycle technique
C.the DMA module and CPU work together(co-operate) to transfer data into or from memory
D.when DMA module get ready, it issues interrupt request signal to CPU for getting interrupt service
微信支付 
支付宝支付