题目内容
某建筑公司承接建造一商场，主体为框架剪力墙结构，箱形基础。该项目地处城市主要街道交叉路口，是该地区的标志性建筑物，各级领导极其重视此建筑的修建工作，所以施工单位在施工过程中加强了对工序指令的控制，由于加强了预防和检查，该楼最终顺利完工，达到验收条件后，建设单位组织了竣工验收。
问题：
(1)施工现场质量检查的方法有哪些？
(2)施工现场目测法和实测法有哪些常用手段？
(3)钢筋分项工程质量如何验收？
(4)钢筋分项工程主要验收内容是什么？
查看答案
搜索结果不匹配？点我反馈
更多问题
Part B (10 points)
You are going to read a text about the tips on preparing a new garden, followed by a list of examples. Choose the best example from the list for each numbered subheading. There is one extra example, which you do not need to use.
Whether you recently moved into a new home or you've just got the gardening itch, planning a new garden can be a great deal of fun. The opportunity to act as creator can be very appealing. But anyone who has gardened for long has learned the necessity of accommodating nature and has developed a sense of humility in the process.
(41) Weather matters
The first thing to determine is what will grow in the spot available for your garden. This is where many gardeners make their first mistake. Too often plants are purchased before thought has been given to the conditions under which they will have to grow. One of chief factors determining what will grow in a particular spot is the weather conditions the plants will be subjected to.
(42) Lay of the land
Next, you will need to determine what type of soil you'll be working with. The three main constituents of soil are sand, silt and clay, Silt particles are of intermediate size. An ideal garden soil, or loam, would be about 40% sand, 40% silt and 20% clay.
(43) Amend your soil
The best way to amend a poor soil, whether sandy, clay or silty, is to add organic matter. Add a combination of topsoil and peat moss or compost will do a great help.
(44) Keep a watch on moisture
Soil moisture is obviously tied to the climate of the area where you live, but even in a small yard there can be wide variations. If your garden is at the bottom of a hill, the soil may remain wet for long periods of time. In this situation, you can try creating a raised bed, but it is best to stick to plants that enjoy having their feet wet.
(45) Don't fight mother nature
While some measures can be taken to make your garden a hospitable place for particular plants, your experience will be much more rewarding if you learn to work with nature. You will save yourself a lot of time, money and grief.
The hardest thing to convince new gardeners of is the need for patience. With the first warm day of spring they are eager to begin planting and nothing can stop them. Many of these bursts of enthusiasm yield ill-conceived gardens doomed to failure. The plants wither and the would-be gardeners become convinced that they lack some secret knowledge or inherent skill. In most of these cases, however, a few hours of planning and preparation would have made all the difference. It is quite easy to dig up a plot and throw some plants in the ground. It is another thing entirely to create a healthy, living garden.
固化在网卡中的EPROM是【 】，Internet网络上的每个节点都能必须指派一个唯一的地址，此地址是IP地址。
What else could Help the Aged do for the old？
It could help ____________________.
阅读以下说明和C语言函数，应填入(n)处。
【说明】
在一个分布网络中，资源(石油、天然气、电力等)可从生产地送往其他地方。在传输过程中，资源会有损耗。例如，天然气的气压会减少，电压会降低。我们将需要输送的资源信息称为信号。在信号从信源地送往消耗地的过程中，仅能容忍一定范围的信号衰减，称为容忍值。分布网络可表示为一个树型结构，如图10-9所示。信号源是树根，树中的每个节点(除了根)表示一个可以放置放大器的子节点，其中某些节点同时也是信号消耗点，信号从一个节点流向其子节点。
每个节点有一个d值，表示从其父节点到该节点的信号衰减量。例如，在图10-9中，节点w、p、q的d值分别为2、1、3，树根节点表示信号源，其d值为0。
每个节点有一个M值，表示从该节点出发到其所有叶子的信号衰减量的最大值。显然，叶子节点的M值为0。对于非叶子节点j，M(j)=max{M(k)+d(k)|k是j的孩子节点}。在此公式中，要计算节点的M值，必须先算出其所有子节点的M值。
在计算M值的过程中，对于某个节点i，其有一个子节点k满足d(k)+M(k)大于容忍值，则应在k处放置放大器，否则，从节点i到某叶子节点的信号衰减量会超过容忍值，使得到达该叶子节点时信号不可用，而在节点i处放置放大器并不能解决到达叶子节点的信号衰减问题。
例如，在图10-9中，从节点p到其所有叶子节点的最大衰减值为4。若容忍值为3，则必须在s处放置信号放大器，这样可使得节点p的M值为2。同样，需要在节点小v处放置信号放大器，如图10—10阴影节点所示。若在某节点放置了信号放大器，则从该节点输出的信号与信号源输出的信号等价。
函数placeBoosters(TreeNode*root)的功能是：对于给定树型分布网络中各个节点，计算其信号衰减量的最大值，并确定应在树中的哪些节点放置信号放大器。
全局变量Tolerance保存信号衰减容忍值。
树的节点类型定义如下：
typedef struct TreeNode{
int id； /*当前节点的识别号*/
int ChildNum； /*当前节点的子节点数目*/
int d; /*父节点到当前节点的信号衰减值*/
struct TreeNode **childptr； /*向量，存放当前节点到其所有子节点的指针*/
int M； /*当前节点到其所有子节点的信号衰减值中的最大值*/
bool boost； /*是否在当前节点放置信号放大器的标志*/
}TreeNode；
【C语言函数】
void placeBoosters(TreeNode *root)
{ /* 计算root所指节点处的衰减量，如果衰减量超出了容忍值，则放置放大器*/
TreeNode *p；
int i，degradation；
if((1) ){
degradation = 0；root-＞M = 0；
i=0；
if (i＞=root-＞ChildNum)
return；
p=(2)；
for(;i＜root-＞ChildNum && p； i++，p =(3)){
p-＞M = 0；
(4)；
if (p-＞d+p-＞M＞Tolerance) { /*在p所指节点中放置信号放大器*/
p-＞boost=true；
p-＞M = 0；
}
if (p-＞d + p-＞M ＞ degradation)
degradation = p-＞d + p-＞M；
}
root-＞M =(5)；
}
}
微信支付 
支付宝支付