You are the network administrator for Testking.com. All network servers run Windows Server 2003. A server named Server1 hosts several applications. This server contains two hard disks, Disk0 and Disk1. Each disk is connected to a different EIDE channel. Each disk is configured as a basic disk and formatted as NTFS. System files are installed on Disk1. You install a third hard disk on Server1. You configure it as a basic disk and format it as NTFS. When you restart Server1, you receive the following message: Visit our reseller at www.PrometricVUE.com for lastest version and special price! Leading the way in IT testing and certification tools, www.testking.com "Windows could not start because of a computer disk hardware configuration problem. Could not read the selected boot disk. Check boot path and disk hardware. Please check Windows documentation about hardware disk configuration and your hardware reference manuals for additional information." You press a key. Server1 restarts, but it displays the same message. You need to ensure that Server1 will start correctly. You solution must not require reinstalling any applications on Server1. What should you do?（）

A. Start Server1 from the Windows Server 2003 installation CD-ROUse the Recovery Console to repair the system.
B. Start Server1 in Safe Mode with Command prompt.
C. Start Server1 from the Windows Server 2003 installation CD-ROPress F6 to replace the Mass Storage driver.
D. Reconfigure the new disk drive so it is enumerated after the existing drives. Restart Server1.