You are the administrator of a small server based network. While installing Windows 2000 Professional on your computer, you configure the network adapter card for each computer to use TCP/IP and assign static IP setting information. During installation the setup detects and installs the 10/100 MBPS UTP only network adepter card on computers 6 & 8 and 10 MBPS/UTP combination adapter card on the other 7 computers. You accept the default settings for the network adapter card and finish installing the network adapter card. All computers are connected to 10/100 switch that has category 5 UTP cabling. After installation you find that computer 6 and 8 can communicate with each other. You want all 9 computers on your network to be able to communicate with each other. What should you do?()
A. Configure the 10/100 switch to transfer only at the 100 MBPS rate.
B. Configure 10/100 MBPS network adapter card to switch all the computers at 10 MBPS rate.
Change the combination network adapter card to use the BNC transceiver setting.
D. Change the combination network adapter card to use the UTP transceiver setting.